Athos 5 Wide, Olympus 5 Wide Firebrick Set

Description Stovax Onyx Athos 5 Wide and Olympus 5 Wide Firebrick Set. Comprises of rear, sides and baffle bricks. Complete set. Genuine Stovax product. Not suitable for Standard versions of the same appliance. How to fit your Stovax Onyx Athos 5 Wide, Olympus 5 Wide Firebrick Set Lift up the front of the bottom baffle (30mm thick fireboard) to allow the two side firebricks (2) to drop into the firebox and be removed. Angle the bottom baffle up on the RHS to allow the LH edge of the baffle to drop into the firebox, allowing for its removal. Top Baffle Fire Board: Lift the back of the top baffle fire board upwards out of the saddle it sits in, whilst pushing it back to allow the front edge to drop into the firebox Top Baffle Fire Board: When refitting the Top Baffle Fire Board make sure this board is pulled tight to the front to seal the front of the board and it into the holder at the rear. Replace the components in reverse order when cleaning is complete, ensuring that the long face of the top baffle is facing downwards when fitted. Rear Fire Boards: To remove these 2 boards pull hard from the top of each board as they are held in place with heatproof silicon, which seal the tertiary air holes against the stove back plate. When refitting again reseal around all of the air holes to prevent air leakage between the rear fire board and back of the stove. To replace the fireboards, repeat the above steps in reverse. How to care for your Athos and Olympus firebricks.